Inquiry Basket

0 item(s) -
Your shopping cart is empty!
Welcome visitor you can login or create an account.

PTM&W

Display: List / Grid
Show:
Sort By:
Aeropoxy 2032 Laminating Resin
A high performance epoxy laminating resin designed for demanding structural applications. Wets fabric easily for predictable laminating with minimal drain. Excellent cured properties with exceptional flexural strength. Heat resistance to 200 F without post-cure. Lower toxicity than comparable products. Mix ratio is 100:33 by volume or 100:27 by weight. Working time @ 22 C = 30 min (PH3630), 60 min (PH3660) or 2 hours (PH3665). Sizes: 1 quart kit, 1 gallon kit, 6.5 gallon kit.
Aeropoxy ES6228 Epoxy Adhesive
A light paste adhesive for high strength metal bonding. Capable of bonding to slightly oily surfaces, for reliable bond and performance. Mix ratio is 1:1 by weight or volume. Sizes: 2 quart kit, 2 gallon kit, 10 gallon kit.
Aeropoxy Light Filler
A two component epoxy fairing and filling material. Exceptionally lightweight at only 4 lbs/gallon, this filler is easy to sand yet retains excellent flexibility. Smooth thixotropic texture holds a fine feather edge, yet will not sag in thick sections. Aeropoxy Light is a non-toxic material, with neither hazardous nor restricted materials in the resin and hardener. Flexibility, excellent adhesion and non corrosive nature lead to very good bond line stability and long term durability. Colour code
HT 2C High Temp Tooling Dough
A strong fiber reinforced paste epoxy system used for producing high temp sandwich construction molds. Molds are very durable and allow for very rapid construction. Smooth, colour coded mix system with good cohesive properties for easy handling and application. Very low curing exotherm produces negligible shrinkage. Excellent strength to weight ratio, machines easily. Can be applied several inches thick for exceptionally stiff tools. Ideal for durable, economical vacuum forming molds.
MVS Epoxy 410 + Hardener 462/464 (5:1)
An easy to use, non blushing, high performance epoxy laminating system from PTW&W. Low viscosity and fast wet out. Outstanding physical properties across the board and very high heat resistance contributes to greater long term stability than similar products. A highly engineered laminating system with modern ingredients which outperforms common epoxy resins designed for coating. Working time @ 22 C = 11 min (462) or 23 min (464). Sizes: 1.2 quart kit, 1.2 gallon kit, 5.4 gallon kit, 63.1 gal
MVS Epoxy 410 + Hardener 468 (3:1)
An easy to use, non blushing, high performance epoxy laminating system from PTM&W. Low viscosity and fast wet out. Outstanding physical properties across the board and very high heat resistance contributes to greater long term stability than similar products. A highly engineered laminating system. Working time @ 22 C = 58 min (468). Sizes: 1.3 quart kit, 1.3 gallon kit, 6 gallon kit, 69.5 gallon kit.
MVS Epoxy 420 + Hardener 468 (3:1)
Identical cured properties to MVS 410, but with a longer pot life of 2 hours. Used with MVS 468 hardener ONLY. Sizes: 1.3 gallon kit, 5.8 gallon kit, 69.4 gallon kit.
PA0738 Filler
A high purity powedered alumina filler blended for addition to casting resins. Fine grain structure allows high filler load while maintaining a good pourable viscosity in the mixed product.
PR 2114 Filled Laminating Resin
A room temperature filled epoxy laminating resin designed for the production of durable, stable tools. Fast wet out with optimum filler load for minimum drain on vertical surfaces. Excellent moisture, chemical and impact resistance make this an excellent general purpose epoxy tooling resin. Thanks to wide hardener selection it is a very versatile resin. Sizes: 10.6 lb kit, 47.2 lb kit, 590 lb kit
PR1105 Surface Coat
A white soft paste, room temperature epoxy surface coat. Smooth thixotropic properties allow it to be applied easily to outside corners and vertical surfaces with minimum sag. A variety of hardeners allow for a wide range of work times, with some providing moisture resistant cures for fabrication of plaster faced patterns. Sizes: 13.5 lb kit, 62.2 lb kit.
PR1154 Surface Coat
A white, medium viscosity, room temperature surface coat with a variety of hardeners to allow for a large range of fabrication environments. Lower viscosity provides excellent reproduction of pattern detail without trapping air. Forms a tough, durable surface that is easy to sand or scribe. An excellent general purpose epoxy surface coat. Sizes: 11.5 lb kit, 57 lb kit.
PR1414 Surface Coat - Silicone Carbide
A room temperature silicone carbide filled epoxy that provides outstanding surface hardness, durability and abrasion resistance. May be applied by brush as a surface coat or cast in thin sections to form an extremely tough die surface. Sizes: 14.3 lb kit, 66 lb kit
PR1554 Surface Coat - Aluminum
A grey, aluminum filled, high temp epoxy surface coat. Smooth viscosity, stands up well to frequent temperature cycling. Low viscosity fills details well without trapping air but with minimum sag on vertical surfaces. Provides high performance service up to 325 F.
PR1945 Surface Coat - Silicone Carbide
A black, high temperature, silicone carbide filled epoxy surface coat. Developed for prepreg lay up tools. Excellent heat resistance and durability for long tool life. Designed for the most demanding high temperature composite applications. Sizes: 12.1 lb kit, 60.5 lb kit.
PR1995 Surface Coat - Graphite
A high temp, graphite filled epoxy surface coat. Unique thermal expansion characteristics make it ideal for the most severe oven or autoclave service. Easy application allows with minimal sag and good air release. Easily scribed, but resists chipping and stress cracking in the most demanding environments. Sizes: 12.3 lb kit, 61.6 lb kit.
PR2040 Fast Adhesive
A fast curing, low viscosity repair epoxy with very high strength and toughness. Can be used as a very fast curing laminating resin for fast production of small, durable parts. Sizes: Available as 45 lb pail.
PR2050 Laminating Epoxy
A tough, unfilled room temperature epoxy laminating resin, which can be used to provide service up to well over 200 F without a post cure. Fast wet out and good versatility with a variety of fibers. Works well for the production of structural parts which require good stability, durability and heat resistance not given by other room temperature setting materials. Sizes: 2.8 lb kit, 9.3 lb kit, 61 lb kit.
PR2520 Mid-High Temp Laminating Epoxy
An amber, unfilled intermediate high temperature epoxy laminating resin. For service to 325 F. Additives allow it to wet fabric easily for fast, reliable fabrication. For high temp service parts that cannot be post cured in the mold. Economical high temp resin. Sizes: 10.5 lb kit, 46.5 lb kit, 446 lb kit.
PR2620 Laminating Epoxy
A grey aluminum filled intermediate high temperature epoxy laminating resin. Filler content controls cost, while providing tough tools with high tensile and flexural strength. Ideal resin for tooling that requires a free-standing, off model post cure. This allows use of lower cost patterns, and overall savings in a tooling program. Works well for vacuum form molds, foam molds and RTM molds where frequent temperature cycling is experienced. Sizes: 10.2 lb kit, 51 lb kit, 534 lb kit.
PR2712 Infusion Epoxy
A high performance, low viscosity infusion epoxy. Special wetting agents allow for fast, even flow and wet out. Low viscosity does not come at the expense of cured physical properties, which exhibit excellent toughness and heat resistance. Sizes: 11 lb kit, 44 lb kit, 611 lb kit.
PR2846 High Temp Laminating Epoxy
An unfilled high temperature laminating system that can provide service over 425 F. Designated for demanding, high temp composite applications. Provides easy wet out, and very easy handling during fabrication. Maybe used for unsupported post cure, however will provide maximum stability when cured on a high temperature master. High temp service obtained without the use of VCHD or restricted diluents. Sizes: 10.8 lb kit, 43 lb kit, 536 lb kit.
PR4431 Aluminum Casting Epoxy
An aluminum filled room temp epoxy casting system with a medium viscosity for easy handling. A versatile, non setting system for tools, fixtures and molds. Extra filler can be easily added for greater economy. Sizes: 13.3 lb kit, 44.4 lb kit.
PR4450 Iron Casting Epoxy
A very tough, iron filled room temp epoxy casting system. Non-settling low viscosity system for easy handling and low air entrapment and excellent detail reproduction. Low shrinkage and excellent cured toughness. Very high compressive strength. Sizes: 15.1 lb kit, 55.8 lb kit
PR5315 Epoxy Styling Clay
A two component epoxy styling clay. Lightweight, non-sagging, smooth consistently for easy shaping. Can be machined and carved with standard tools. Can be applied in layers of 4\ or greater without excessive sag or shrink. Finished part is lighter than parts made with real clay and can accept a wide variety of surfaces for finishing. Sizes: Available as 40 pail kit only
PT5355 Fire Retardant Laminating Epoxy
A white filled, high performance fire retardant laminating epoxy. Easy, room temp cure epoxy which exhibits self extinguishing characteristics without the usual fire retarding additives. Good cured physical properties and toughness. Sizes: 10.8 lb kit, 50 lb kit, 536 lb kit.

Catalogue, phone, or in the showroom - we're here to help.  With over 25 years in the business, we know the importance of interaction in making sure you are happy with your order and the results our products provide. We want your long term business trust, not just a sale.  If you have any ideas that would make it easier for you to get what you need at Composites Canada, please let us know.

Call or Email Us:

1-877-773-7336
This email address is being protected from spambots. You need JavaScript enabled to view it.

Visit Our Showroom:

1100 Meyerside Drive
Mississauga, ON  L5T 1J4

Monday-Friday
9 am to 5 pm

Parking

When facing our building, the showroom driveway is on the LEFT side of the building. Parking and the showroom entrance are halfway down the side.