Canada’s largest selection of Composites, Resins, Gelcoats, Epoxies, Silicones, Urethanes, Fiberglass, Carbon Fiber, Abrasives, and Sundries. 1-877-773-7336 |
Fine bundles of fiberglass yarn in a satin weave. Weave produces high strength for the weight. Excellent drapeability, easy to from onto complex shapes. Use with low viscosity resin for adequate wet out.
5.5 oz, 50 inch, 3K/1500 Denier Kevlar, 13 x 13 fibers per inch.
Kevlar and carbon combined in one cloth. The best of both worlds; the stiffness and strength of carbon and impact toughness of kevlar. Carbon fiber runs in the 0 deg. direction while kevlar is oriented in the 90 deg. direction.
6.2 oz, 50 inch, 3K, 13x13 fibers per inch.
Twill fabrics are the workhorse of the carbon industry. Conformable, stable, and good looking - this is what most people think of when they imagine carbon fiber. Lightweight, good drapability, black color. Ideal for thin parts, mold surface plies, automotive hoods and interior parts.
6.4 oz, 40 inch, 3K, 13x13 fibers per inch.
A twill fabric with a hot melt scrim fused to one side. The scrim stabilizes the fabric for automated cutting and complex placement operations. Lightweight, good drapability, very stable, does not fray. Ideal for CNC fabric cutters, complex shapes, resin infusion
Woven fabric in a plain weave. Better strength to weight ratio than mat or woven roving. Typically used in thing lightweight laminates or in conjunction with other reinforcements. Compatible with all resins that we supply.
A Dupont product of aramid fibers available in an assortment of weaves. High tensile strength (43,000 psi), high tensile modulus (9,000,000 psi), high impact strength, high abrasion resistance, vibration dampening characteristics and low specific gravity. Only compatible with vinyl ester or epoxy resin.
Sizes: Sold by the linear yard or full roll. From 1.8 oz. to 9 oz.
Lightweight cloth that has high thread count. Commonly used to reinforce a thin layer of resin for a smooth, print-free surface layer. Can be a replacement for gelcoat as a first layer into a mold. Widely used by model builders.
Though visually quite similar, S-Glass has a different chemical composition from that of E-Glass. One lamination of S-Glass can replace several laminations of E-Glass. S-Glass has approximately 30% more tensile strength and 15% more stiffness than E-Glass and retains these properties up to 1500 F. S-Glass also has a superior impact strength. Compatible with all resin that we supply.
Weights: from 1.8 oz. to 8.9 oz.
A biaxial fabric at 0 deg. and 90 deg. (BX = +45 deg. and -45 deg./TX = 0 deg. + 45 deg. and -45 deg.) and stitched to a lightweight mat. Desired when speed in lay up is required. Chopped strand mat layer assures good bond between layers.
Sizes: Rolls are 50 inches wide.
Unidirectional carbon running in the warp direction (0 deg.). Stiffest form of reinforcement. Carbon is held in place by sparse hot melt fill fibers bonded to the carbon. Will not unravel when cut down to narrower widths.
Catalogue, phone, or in the showroom - we're here to help. With over 25 years in the business, we know the importance of interaction in making sure you are happy with your order and the results our products provide. We want your long term business trust, not just a sale. If you have any ideas that would make it easier for you to get what you need at Composites Canada, please let us know.
Call or Email Us: