Canada’s largest selection of Composites, Resins, Gelcoats, Epoxies, Silicones, Urethanes, Fiberglass, Carbon Fiber, Abrasives, and Sundries. 1-877-773-7336 |
A spray rubber adhesive designed for temporary bonds. Can be used on materials needing extra tack for placement on vertical or difficult surface areas. SCRIMP and VARTM process rely on Airtac 2 for holding plies in place until resin infusion is completed.
Sizes: sold by the aerosol can (16.5 oz) and case (12 cans).
A 4, 7 and 10 oz stretchable non-woven polyester felt with drapeability enabling it to easily conform to contours. Multi-directional stretch combined with low density lightweight construction makes for highly efficient bleeder or breather. N4 will conduct air @ 85 psi (5.9 bars). It does not contain any binder which could close off air-flow. Maximum service temperature is 400 deg. F. White in colour.
Sizes: Width: 60in. Sold by the linear yard and full roll (N4 = 100 ly, N7 and N10 = 50 ly).
Traceable Digital Vacuum Gauge accurate to 1% of the full scale plus 1 digit. Serial RS-232 output allows it to be connected to a computer or data logger for monitoring and keeping results. To assure accuracy an individually serial-numbered Traceable Certificate is provided from ISO 17025. It indicates traceability to standards provided by NIST. Memory keys and data hold buttons. Transducer has 1/4in NPT male threaded stainless steel end. Cable is 40 inches. Accurate to 0.05in Hg.
An economical 1.5 mil nylon film good for room temperature cures. Maximum temperature is 250 deg. F. Colour is clear. Width 60in or 120in. Note: film loses softness after being stored in dry environment. Solution - place in a plastic bag and steam so that the film can absorb moisture and retain its softness and pliablity.
Sizes: Sold by the linear yard and full roll (333 ly).
An Omega shaped reusable resin distortion system used with resin infusion techniques. Use on top of the laminate for stable resin distribution with a minimum of print onto the part. Available in vinyl heat resistant silicone rubber.
Sizes: Sold by the linear foot.
A 3 oz moderately coarse nylon fabric that has been sourced and heat set so that it is contaminant free and will not shrink during the curing process. Excellent for secondary bonding. Colour is white.
Sizes: Width: 60in. Sold by the linear yard and full roll (f = 250 ly, Econostitch = 100 ly).
A 2 oz smooth nylon fabric that has been sourced and heat set so that it is contaminant free and will not shrink during the curing process. Colour is white.
Sizes: Width: 60in. Sold by the linear yard and full roll (J = 100 ly, C = 250 ly).
A room temperature release film that can also be used as a vacuum bag. Use perforated over laminate to control resin bleed and/or help release peel ply in problem areas. Maximum temperature is 285 deg. F. Green in colour. Embossed product allows bleed when used as vacuum bag. Available perforated and non-perforated.
Sizes: Thickness: 1 mil. Width: 60in. Sold by the linear yard or full roll (667 ly). Embossed product is only sold non-perforated by the full roll (167 ly).
A high heat and high elongation release fabric with universal non-stick properties. Good drapeability at a thickness of 1 mil. Maximum temperature is 600 deg. F. Red or blue in colour. Available perforated and non-perforated.
Sizes: Width is 50in. Sold by the linear yard or full roll (167 ly).
A water based PTFE release agent from Airtech that contains no silicone. Can be used for cure cycles up to 450 deg. F. For use with composite and metal tools; provides release from most resin systems. Does not attract moisture after cure, so will not produce steam during an oven cure. Unlike other water based mold releases, can be used on composite molds without need of a sealer. One coat allows multiple releases.
A very stretchy 1.5 mil film will contour in and around many compound curves without the need to pleat. 600% elongation with memory. Maximum temperature is 250 deg. F. Colour is green.
Sizes: Sold by the linear yard and full roll (333 ly). Width: 60in.
A very stretchy 2 mil film that will contour in around many compound curves without the need to pleat. Over 400 % elongation. Maximum temperature is 400 deg F. Colour is orange.
Sizes: Only sold by the full roll (333 ly).
A high quality transparent gold (WL6400) and transparent green (WL7400) in color co-extruded nylon 6 films. Used in applications where softness, workability and pin-hole free film is essential. Maximum service temperature is 350 deg. F (WL6400) and 400 deg. F (WL7400). Width: 60in. Note: Film loses softness after being stored in dry environment. Solution - place in a plastic bag and steam so that the film can absorb moisture and retain its softness and pliability.
Sizes: Sold by the linear yard
Industry standard compound for providing a tight seal and clean release of vacuum bag. Will bond to any tool surface. Suitable for applications of temperatures up to 400 deg. F. Colour is yellow. Also available: GS-100 - 375 deg. F/brown,GS-213 - 400 deg. F/cream.
Sizes: Roll size: 1/2in x 1/8in x 25`. Available by the roll or case (40 rolls).
A portable, economical leak detector for finding leaks in vacuum bags, sealant tape, hoses and fittings. Visual display, adjustable range can filter out ambient noise. With included headphones can convert ultrasonic leak sounds into a audible range.
Catalogue, phone, or in the showroom - we're here to help. With over 25 years in the business, we know the importance of interaction in making sure you are happy with your order and the results our products provide. We want your long term business trust, not just a sale. If you have any ideas that would make it easier for you to get what you need at Composites Canada, please let us know.
Call or Email Us: