Inquiry Basket

0 item(s) -
Your shopping cart is empty!
Welcome visitor you can login or create an account.

Additives / Fillers

Display: List / Grid
Show:
Sort By:
3M Microballoons - K20
Low density microballoon spheres filler used to make putties which are lightweight and easy to sand. Use caution when mixing, aggressive action will break spheres. For sanding putty on a vertical surface mix 4 parts microballoons and 1 part cabosil. Colour is white. >>
Air Dry
Waxed solution added to unwaxed polyester and vinyl ester resins and gelcoats to achieve a tack-free surface suitable for sanding. Commonly used in final coat. Add 3% by volume. Sizes: 350 ml, 1 liter, 1 gallon, 5 gallons. >>
BPO Hardener
Benzyl Peroxide creme hardener. White in colour. Sizes: 4 oz, 500 ml, 1 liter, 1 gallon. >>
BYK 066 Defoamer
Highly efficient defoamer. Provides good surface tension reduction for better flow and leveling. Improves wet out properties. Suitable for a wide range of two-component chemistry including epoxies. Add between 0.2 and 1.0%. Colour is clear. Sizes: 50 ml, 250 ml, 1 liter, 1 gallon. >>
Cabosil
Low density filler made of fumed silica powder. Thickens all resins and adds good antisag properties when working on vertical surfaces. Excellent bonding and abrasion resistance qualities. Difficult to sand. Particles are easily airborne. Adds hardness to cured product. >>
Cabosil TS-720
Low density filler made of fumed silica powder. Thickens all resins and adds good antisag properties when working on vertical surfaces. Excellent bonding and abrasion resistance qualities. Difficult to sand. Particles are easily airborne. Adds hardness to cured product. Hydrophobic cabosil will not absorb moisture. >>
Chopped Strands
Glass fibers (6 mm, 12 mm and 24 mm). Can be added to resin to make a coarse high strength filler. Also used in very intricate areas of molding surfaces where lay-up with cloth or chopped strand mat is difficult. >>
Cobalt 6%
Added to unpromoted vinyl ester resins to customize curing time. Present in all polyester resins but can be added to accelerate gel time to avoid slumping but allows for a longer curing time to minimize shrinkage. Sizes: 50 ml, 250 ml, 1 liter, 1 gallon. >>
Cotton Fibers
High strength low density cotton fibers can be added to resin to make a strong and light weight smooth putty. >>
DEA
Added to polyester and vinyl ester resins to speed up total cure time without changing the working time. Sizes; 50 ml, 350 ml, 1 liter, 1 gallon, 5 gallons. >>
Epoxy Pigments
Colour paste pigments used for tinting epoxy resins. No UV filters - epoxy resins must be topcoated with UV barrier. Add no more than 5% by weight. Primary colours available. Sizes: 4 oz, 1 quart. >>
Fillers - Bronze Powders (Light/Dark)
Light and dark bronze powders added to casting resins allow the end user an alternative to expensive metal casting. When mixed to a casting resin at approximately two to one by weight, the final product takes on the appearance and feel of a finely crafted brass or bronze casting. Surface of final product can be polished with steel wool to add a met >>
Hi-Point 90/DDM-9/Cadox M-50/Quickset
Methyl Ethyl Ketone Peroxide hardeners. Available size: 8 lbs (1 gallon). >>
MEKP Hardener
Methyl Ethyl Ketone Peroxide liquid hardener for polyester and vinyl ester resins, gelcoats and Composites Canada putties. available quantity________corresponding resin quantity @ 1% mix: 15 ml__________________1 liter 50 ml__________________1 gallon 250 ml_________________5 gallons 500 ml________________10 gallons 8 lbs (1 gallon)_________70 gallo >>
Milled Carbon Fibers
Carbon fibers 200 micron length. Blended into resin to make exceptionally strong putty. Cured putty or casting is black and conductive. >>
Milled Fibers
High density finely milled short glass fibers. Available fiber lengths: 1/8 and 1/32 inch. Makes jelly-like putty with high shear strength. When used in conjunction with cabosil creates structural putty with excellent bonding strength. >>
PA0738 Filler
A high purity powedered alumina filler blended for addition to casting resins. Fine grain structure allows high filler load while maintaining a good pourable viscosity in the mixed product. >>
Phenolic Microballoons
Low density microballoon spheres filler used to make putties which are lightweight and easy to sand. Makes a tougher putty than glass microspheres with greater shear strength. Purple/Brown. >>
Polyester Pigments
Colour paste pigments used for tinting polyester and vinyl ester resins and gelcoats. Add no more than 10% by weight. The stock colours are: white, black, grey, gold oxide, tan, brown, dark brown, orange, candy-apple red, red, dark red, yellow, canary yellow, dark green and dark blue. Sizes: 50 ml, 250 ml, 1 liter, 1 gallon. >>
Siscor Spheres
Low density filler made from porous expanded glass spheres similar to volcanic rock. They have the unique property of not significantly affecting resin viscosity and so can be used at a very high filler load, keeping resin costs down for large castings. Siscor spheres are available in sizes ranging from 0.1 mm to over 6 mm. Since they are made of g >>
Snowhite
Inexpensive filler for casting resin. Add up to 60% by weight. Due to its high density, gives casting a heavy, `stone-like` feel. >>
Styrene
The base for polyester and vinyl ester resin and gelcoats. Can be used as a thinner for these products. Add up to 5% by volume. Also used as surface prep for polyester resin repair. Sizes: 350 ml, 1 liter, 1 gallon, 5 gallon. >>
Talc
Economical filler. Makes sanding putty. >>
West System Microlight
410 >>

Catalogue, phone, or in the showroom - we're here to help.  With over 25 years in the business, we know the importance of interaction in making sure you are happy with your order and the results our products provide. We want your long term business trust, not just a sale.  If you have any ideas that would make it easier for you to get what you need at Composites Canada, please let us know.

Call or Email Us:

1-877-773-7336
This email address is being protected from spambots. You need JavaScript enabled to view it.

Visit Our Showroom:

1100 Meyerside Drive
Mississauga, ON  L5T 1J4

Monday-Friday
9 am to 5 pm

Parking

When facing our building, the showroom driveway is on the LEFT side of the building. Parking and the showroom entrance are halfway down the side.